United States

ACO SWM > ACO Drain > KlassikDrain > K300/KS300

K300/KS300

KlassikDrain — K300/KS300 12” Internal Width

Grates

When selecting the grate there are a couple of factors that have to be considered, including the load classification (resistance to failure), slot pattern (water intake), material (corrosion resistance, etc.), locking (making grate captive to channel), and aesthetics (finished look). Click here for further information on grate selection.

Longitudinal Stainless Steel

A top view of a galvanized steel grate

Longitudinal Stainless Steel - Load Class A - An ADA compliant grate made from grade 304 stainless steel complete with a non-slip surface. The longitudinal slots are in the same direction as the trench and is available in meters and half meters.
Click here for more info.

A top view of a galvanized steel grate

Mesh Steel - Load Class C - Anti-slip and bicycle safe grate with large openings for high water intake. Available in galvanized or stainless steel.
Click here for more info.

A top view of an iron grate

Slotted Iron - Load Class C - Features perpendicular slots to the trench body. Manufactured from ductile iron.
Click here for more info.

Longitudinal Iron

A top view of an iron grate

Longitudinal Iron - Load Class C - An ADA compliant grate with longitudinal slots flowing the same direction as the trench. Maufactured from ductile iron.
Click here for more info.

A top view of an iron grate

Wave Iron - Load Class C - A decorative ductile iron grate designed to give a wave-like flow to the slots along the trench drain.
Click here for more info.

Perforated Steel

A top view of a galvanized steel grate

Perforated Steel - Load Class C - Features circular holes for water intake at a regular interval. Available in full and half meters and galvanized or stainless steel.
Click here for more info.

Longitudinal Iron

A top view of an iron grate

Longitudinal Iron - Load Class E - An ADA compliant grate with longitudinal slots flowing the same direction as the trench. Maufactured from ductile iron.
Click here for more info.

Try the ACO Visualizer to see options of grates with different surfaces! View ACO Visualizer

Load Class A (En 1433) - 3,372 lbs - 58 psi Pedestrian Traffic

Key

ADA compliant

Compliant with Americans with Disabilities Act of 2010, Section 302.3

Heel-resistant

ASME A112.6.3 - 2001 Heel-resistant slot width less than 0.31" (8 mm)

Heel-safe

Heel-safe slot width equal or less than 0.25" (6.5 mm)

Anti-slip grates

BPN over 24 (test results available)

Bicycle safe

Compliant to Australian Standard AS 3996 - 2006

Non-metallic

No metallic/magnetic parts included

Water Intake

Click these icons to calculate water intake on that specific grate style

		Part No.	Length in (m)	Slot size in	Intake area in²	Calculate Water Intake	Weight lbs
LOAD CLASS A (EN 1433) - 3,372 LBS -58 PSI (PEDESTRIAN TRAFFIC)
LONGITUDINAL STEEL													DRAINLOK LOCKING
	Type 847D - stainless	142223	39.37 (1.0)	0.81 x 0.24	263.2		29.0	✓	✓	✓	✓	✓	Spec Sheet
	Type 848D - stainless	142224	19.69 (0.5)	0.81 x 0.24	131.6		14.0	✓	✓	✓	✓	✓	Spec Sheet

Load Class C (En 1433) - 56,202 lbs - 967 psi Commercial Vehicle Traffic

DrainLok grates provide continual access to the channel and features the locking mechanism as an integral part of the grate.

Key

ADA compliant

Compliant with Americans with Disabilities Act of 2010, Section 302.3

Heel-resistant

ASME A112.6.3 - 2001 Heel-resistant slot width less than 0.31" (8 mm)

Heel-safe

Heel-safe slot width equal or less than 0.25" (6.5 mm)

Anti-slip grates

BPN over 24 (test results available)

Bicycle safe

Compliant to Australian Standard AS 3996 - 2006

Non-metallic

No metallic/magnetic parts included

Water Intake

Click these icons to calculate water intake on that specific grate style

		Part No.	Length in (m)	Slot size in	Intake area in²	Calculate Water Intake	Weight lbs
LOAD CLASS C (EN 1433) - 56,202 LBS -967 PSI (COMMERCIAL VEHICLE TRAFFIC)
MESH STEEL													DRAINLOK LOCKING
	Type 805D - galvanized	133675	19.69 (0.5)	0.63 x 0.87	163.7		26.2	✓	×	×	×	✓	Galvanized Spec Sheet Stainless Spec Sheet
	Type 830D - stainless	133678	19.69 (0.5)	0.63 x 0.87	163.7		29.5	✓	×	×	×	✓	Galvanized Spec Sheet Stainless Spec Sheet
SLOTTED IRON													DRAINLOK LOCKING
	Type 860D - iron	13870	19.69 (0.5)	0.47 x 2.57 avg.	88.1		38.0	✓	×	×	×	✓	Spec Sheet
LONGITUDINAL IRON													DRAINLOK LOCKING
	Type 876D - iron	99588	19.69 (0.5)	1.97 x 0.24	64.3		35.0	✓	✓	✓	✓	✓	Spec Sheet
WAVE IRON													DRAINLOK LOCKING
	Type 880D - iron	99581	19.69 (0.5)	0.27 x 0.9 avg	88.5		37.0	✓	✓	✓	×	✓	Spec Sheet
PERFORATED STEEL													QUICKLOK LOCKING
	Type 811Q - galvanized	98967	39.37 (1.0)	Ø 0.25	63.8		30.9	×	✓	✓	✓	✓	Galvanized Spec Sheet Stainless Spec Sheet
	Type 813Q - galvanized	98966	19.69 (0.5)		31.9		15.0	×
	Type 865Q - stainless	98968	39.37 (1.0)		63.8		30.9	✓
	Type 866Q - stainless	98969	19.69 (0.5)		31.9		15.0	✓

Load Class E (En 1433) - 134,885 lbs - 2,321 psi Industrial Traffic

DrainLok grates provide continual access to the channel and features the locking mechanism as an integral part of the grate.

Key

ADA compliant

Compliant with Americans with Disabilities Act of 2010, Section 302.3

Heel-resistant

ASME A112.6.3 - 2001 Heel-resistant slot width less than 0.31" (8 mm)

Heel-safe

Heel-safe slot width equal or less than 0.25" (6.5 mm)

Anti-slip grates

BPN over 24 (test results available)

Bicycle safe

Compliant to Australian Standard AS 3996 - 2006

Non-metallic

No metallic/magnetic parts included

Water Intake

Click these icons to calculate water intake on that specific grate style

		Part No.	Length in (m)	Slot size in	Intake area in²	Calculate Water Intake	Weight lbs
LOAD CLASS E (EN 1433) - 134,885 LBS - 2,231 PSI (INDUSTRIAL TRAFFIC)
LONGITUDINAL IRON													QUICKLOK LOCKING
	Type 878Q - iron	138130	19.69 (0.5)	1.0 x 0.31	61.8		52.0	✓	✓	✓	✓	✓	Spec Sheet
SLOTTED IRON													QUICKLOK LOCKING
	Type 861Q - iron	10431	19.69 (0.5)	0.39 x 5.71	97.0		58.0	✓	×	×	×	✓	Spec Sheet

Locking Devices

DRAINLOK - BOLTLESS & BARLESS LOCKING SYSTEM

Factory-fitted locking device removes need for bolts and bars and improves channel hydraulic capacity. The DrainLok mechanism clips into channel edge rail for rapid installation. DrainLok grates are fit with an anti-shunt mechanism that restricts unwanted grate movement when installed, improving durability and longevity of the system.

Push down or stand on grate until it clicks into position.

Position grate onto channel and align anti-shunt detail with recess in rail.

To remove first grate, insert grate removal tool into slots at end of grate, pull up sharply. Remaining grates can be removed by hand.

QUICKLOK® - BOLTLESS LOCKING SYSTEM

Comprised of either a glass nylon stud or steel pin fitted to grate and a removable QuickLok® bar in channel, QuickLok® locks grate to channel by aligning stud over locking bar and applying pressure until they snap together. With no loose bolts or bars, QuickLok® provides a highly secure boltless lock that is still easy to take apart for maintenance and cleaning. This saves time and money during installation.

Locate locking bar in channel wall recesses by rotating clockwise.

Use hammer to tap bar into place so that serrated ends grip in recess.

To install grate, align QuickLok® stud directly over locking bar.

Push down or stand on grate until it clocks into position.

To remove first grate, insert grate removal tool into slots at end of grate, pull up sharply. Remaining grates can be removed by hand.

To remove bar, insert screwdriver into hole at end of bar and lever back serrated end, rotate bar free.

System Layout

K300_System_Layout

Parts List

	Part No.		Invert Depth				Overall Depth				Volume	Weight
	K300	KS300	in		mm		in		mm		gal	lbs
	K300	KS300	female	male	female	male	female	male	female	male
K3-00 Constant depth channel – 39.37″ (1 m)*	76041	76441	11.81	11.81	300	300	12.80	12.80	325	325	18.01	132.6
K3-1 Sloped channel – 39.37″ (1 m)	76001	76401	11.81	12.01	300	305	12.80	12.99	325	330	19.58	132.6
K3-2 Sloped channel – 39.37″ (1 m)	76002	76402	12.01	12.20	305	310	12.99	13.19	330	335	20.01	133.8
K3-3 Sloped channel – 39.37″ (1 m)	76003	76403	12.20	12.40	310	315	13.19	13.39	335	340	20.44	135.0
K3-4 Sloped channel – 39.37″ (1 m)	76004	76404	12.40	12.60	315	320	13.39	13.58	340	345	20.86	136.2
K3-5 Sloped channel – 39.37″ (1 m)*	76005	76405	12.60	12.80	320	325	13.58	13.78	345	350	21.28	137.4
K3-6 Sloped channel – 39.37″ (1 m)	76006	76406	12.80	12.99	325	330	13.78	13.98	350	355	21.69	138.6
K3-7 Sloped channel – 39.37″ (1 m)	76007	76407	12.99	13.19	330	335	13.98	14.17	355	360	22.11	139.8
K3-8 Sloped channel – 39.37″ (1 m)	76008	76408	13.19	13.39	335	340	14.17	14.37	360	365	22.51	141.0
K3-9 Sloped channel – 39.37″ (1 m)	76009	76409	13.39	13.58	340	345	14.37	14.57	365	370	22.92	142.2
K3-10 Sloped channel – 39.37″ (1 m)*	76010	76410	13.58	13.78	345	350	14.57	14.76	370	375	23.32	143.4
K3-010 Constant depth channel – 39.37″ (1 m)*	76043	76443	13.78	13.78	350	350	14.76	14.76	375	375	21.22	143.4
K3-0103 Constant depth channel – 19.69″ (0.5 m)*	76044	76444	13.78	13.78	350	350	14.76	14.76	375	375	10.61	75.3
K3-11 Sloped channel – 39.37″ (1 m)	76011	76411	13.78	13.98	350	355	14.76	14.96	375	380	23.72	144.6
K3-12 Sloped channel – 39.37″ (1 m)	76012	76412	13.98	14.17	355	360	14.96	15.16	380	385	24.11	145.8
K3-13 Sloped channel – 39.37″ (1 m)	76013	76413	14.17	14.37	360	365	15.16	15.35	385	390	24.51	147.0
K3-14 Sloped channel – 39.37″ (1 m)	76014	76414	14.37	14.57	365	370	15.35	15.55	390	395	24.89	148.2
K3-15 Sloped channel – 39.37″ (1 m)*	76015	76415	14.57	14.76	370	375	15.55	15.75	395	400	25.27	149.4
K3-16 Sloped channel – 39.37″ (1 m)	76016	76416	14.76	14.96	375	380	15.75	15.94	400	405	25.68	150.6
K3-17 Sloped channel – 39.37″ (1 m)	76017	76417	14.96	15.16	380	385	15.94	16.14	405	410	26.06	151.8
K3-18 Sloped channel – 39.37″ (1 m)	76018	76418	15.16	15.35	385	390	16.14	16.34	410	415	26.44	153.0
K3-19 Sloped channel – 39.37″ (1 m)	76019	76419	15.35	15.55	390	395	16.34	16.54	415	420	26.83	154.2
K3-20 Sloped channel – 39.37″ (1 m)*	76020	76420	15.55	15.75	395	400	16.54	4.92	420	125	27.21	155.4
K3-020 Constant depth channel – 39.37″ (1 m)*	76045	76445	15.75	15.75	400	400	16.73	16.73	425	425	24.53	155.4
K3-0203 Constant depth channel – 19.69″ (0.5 m)*	76046	76446	15.75	15.75	400	400	16.73	16.73	425	425	12.27	82.3
K3-21 Sloped channel – 39.37″ (1 m)	76021	76421	15.75	15.94	400	405	16.73	16.93	425	430	27.59	156.7
K3-22 Sloped channel – 39.37″ (1 m)	76022	76422	15.94	16.14	405	410	16.93	17.13	430	435	27.97	157.9
K3-23 Sloped channel – 39.37″ (1 m)	76023	76423	16.14	16.34	410	415	17.13	17.32	435	440	28.34	159.1
K3-24 Sloped channel – 39.37″ (1 m)	76024	76424	16.34	16.54	415	420	17.32	17.52	440	445	28.72	160.3
K3-25 Sloped channel – 39.37″ (1 m)*	76025	76425	16.54	16.73	420	425	17.52	17.72	445	450	29.09	161.5
K3-26 Sloped channel – 39.37″ (1 m)	76026	76426	16.73	16.93	425	430	17.72	17.91	450	455	29.47	162.7
K3-27 Sloped channel – 39.37″ (1 m)	76027	76427	16.93	17.13	430	435	17.91	18.11	455	460	29.84	163.9
K3-28 Sloped channel – 39.37″ (1 m)	76028	76428	17.13	17.32	435	440	18.11	18.31	460	465	30.21	165.1
K3-29 Sloped channel – 39.37″ (1 m)	76029	76429	17.32	17.52	440	445	18.31	18.50	465	470	30.58	166.3
K3-30 Sloped channel – 39.37″ (1 m)*	76030	76430	17.52	17.72	445	450	18.50	18.70	470	475	30.95	167.5
K3-030 Constant depth channel – 39.37″ (1 m)*	76047	76447	17.72	17.72	450	450	18.70	18.70	475	475	27.87	167.5
K3-0303 Constant depth channel – 19.69″ (0.5 m)*	76048	76448	17.72	17.72	450	450	18.70	18.70	475	475	13.94	89.5
K3-31 Sloped channel – 39.37″ (1 m)	76031	76431	17.72	17.91	450	455	18.70	18.90	475	480	31.32	168.7
K3-32 Sloped channel – 39.37″ (1 m)	76032	76432	17.91	18.11	455	460	18.90	19.09	480	485	31.69	169.9
K3-33 Sloped channel – 39.37″ (1 m)	76033	76433	18.11	18.31	460	465	19.09	19.29	485	490	32.06	171.1
K3-34 Sloped channel – 39.37″ (1 m)	76034	76434	18.31	18.50	465	470	19.29	19.49	490	495	32.42	172.3
K3-35 Sloped channel – 39.37″ (1 m)*	76035	76435	18.50	18.70	470	475	19.49	19.69	495	500	32.79	173.5
K3-36 Sloped channel – 39.37″ (1 m)	76036	76436	18.70	18.90	475	480	19.69	19.88	500	505	33.16	174.7
K3-37 Sloped channel – 39.37″ (1 m)	76037	76437	18.90	19.09	480	485	19.88	20.08	505	510	33.52	175.9
K3-38 Sloped channel – 39.37″ (1 m)	76038	76438	19.09	19.29	485	490	20.08	20.28	510	515	33.88	177.1
K3-39 Sloped channel – 39.37″ (1 m)	76039	76439	19.29	19.49	490	495	20.28	20.47	515	520	34.25	178.3
K3-40 Sloped channel – 39.37″ (1 m)*	76040	76440	19.49	19.69	495	500	20.47	20.67	520	525	34.61	179.5
K3-040 Constant depth channel – 39.37″ (1 m)*	76049	76449	19.69	19.69	500	500	20.67	20.67	525	525	31.25	179.5
K3-0403 Constant depth channel – 19.69″ (0.5 m)*	76050	76450	19.69	19.69	500	500	20.67	20.67	525	525	15.63	97.7
Notes 1. K300 has a galvanized steel edge rail for general use. KS300 has a grade 304 stainless steel edge rail for use where increased aesthetics or corrosion resistance is required. 2. KlassikDrain is sold as channel only. * This channel features bottom knockouts; 6″ & 8″ for 300 mm channels.

Price List

2022-K300_KS300-Pricing

Catch Basins

K300_KS300-Catch-Basins

Accessories

		Part No.	ID (in) Female	ID (in) Male	ID (mm) Female	ID (mm) Male	OD (in) Female	OD (in) Male	OD (mm) Female	OD (mm) Male	Weight (lbs)
	K3 Universal inlet/outlet/end cap Fits all channels and manufactured from black ABS. Guides aid cutting to correct height. Wings clip cap onto end of channel. 4" bell end connection to SCH 40 pipe. Seal using PVC-ABS cement.	96826	19.69	19.69	500	500	20.47	20.47	520	520	2.5
	K3 Installation device Fits molded recesses on body of channel. Provides height and joint alignment - a sliding clamp locks the two channels together. Bolt to rebar on either side of channel to hold channels in place during concrete pour. Not reusable; it is 'lost' within concrete haunch.	97479	-	-	-	-	-	-	-	-	4.9
	Grate removal tool Can be used to remove DrainLok or QuickLok grates.	01318	-	-	-	-	-	-	-	-	0.3
	K2 Quicklok® locking bar For use with QuickLok grates only.	10458	-	-	-	-	-	-	-	-	0.7

Documents

Catalog/Brochures/Cut Sheets

DR100 ACO Drain Catalog Part 1 – Introduction

DR100 ACO Drain Catalog Part 2 – KlassikDrain

DR100 ACO Drain Catalog Part 5 – Technical Support

DR300 ACO Drain Overview

DL054 KlassikDrain Brochure ENGLISH 2018

DL054 KlassikDrain Brochure SPANISH 2017

DL016 Polymer Concrete Install Guide Spanish 2017

DR702 Installation Device Guide

DR700A Polymer Concrete Installation Manual

Installation Template

Specification Information Sheets

3-Part Specification

KlassikDrain – General Duty Trench Drain 3-Part Spec Sheet

Trench Systems

KlassikDrain - K300 galvanized steel edge rail channel system.pdf

KlassikDrain - KS300 Stainless steel edge rail channel system.pdf

DrainLok Grates

Type 805D Mesh Galvanized Steel Grate Spec Sheet.pdf

Type 811D-813D Perforated galvanized steel grate - ADA.pdf

Type 830D Mesh stainless steel grate.pdf

Type 847D-848D Longitudinal stainless steel grate (ada).pdf

Type 860D Ductile iron slotted grate.pdf

Type 865D-866D Perforated stainless steel grate - ADA.pdf

Type 876D Longitudinal ductile iron grate (ada).pdf

Type 880D Wave ductile iron grate.pdf

QuickLok Grates

Type 805Q Mesh galvanized steel grate.pdf

Type 811Q-813Q Perforated galvanized steel grate - ADA.pdf

Type 830Q Mesh stainless steel grate.pdf

Type 847Q-848Q Longitudinal stainless steel grate - ADA.pdf

Type 861Q Ductile iron slotted grate.pdf

Type 865Q-866Q Perforated stainless steel grate - ADA.pdf

Type 878Q Longitudinal ductile iron grate C - ADA.pdf

Type 878Q Longitudinal ductile iron grate E - ADA.pdf

Type 879Q Mosaic ductile iron grate.pdf

Type 880Q Wave ductile iron grate.pdf

Type 881Q Deco ductile iron grate.pdf

Installation Section Details

Description		Documents
Description		PDF	DWG
K300 DrainLok	K300 12”, Galv. Steel Edge Rail, Class A - Exposed Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class A - Exposed Concrete Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class A - Exposed Paver Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class A - Haunched Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class A - Haunched Paver Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class B - Exposed Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class B - Exposed Concrete Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class B - Exposed Paver Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class B - Haunched Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class B - Haunched Paver Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class C - Exposed Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class C - Exposed Concrete Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class C - Exposed Paver Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class C - Haunched Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class C - Haunched Paver Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class D - Exposed Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class D - Exposed Concrete Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class D - Exposed Paver Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class D - Haunched Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class D - Haunched Paver Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class E - Exposed Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class E - Exposed Concrete Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class E - Exposed Paver Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class E - Haunched Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class E - Haunched Paver Pavement	Download	Download
K300 QuickLok	K300 12”, Galv. Steel Edge Rail, Class A - Exposed Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class A - Exposed Concrete Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class A - Exposed Paver Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class A - Haunched Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class A - Haunched Paver Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class B - Exposed Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class B - Exposed Concrete Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class B - Exposed Paver Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class B - Haunched Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class B - Haunched Paver Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class C - Exposed Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class C - Exposed Concrete Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class C - Exposed Paver Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class C - Haunched Asphalt Pavement	Download	Download
	K300 12”, Galv. Steel Edge Rail, Class C - Haunched Paver Pavement	Download	Download
KS300 DrainLok	KS300 12”, Stainless Steel Edge Rail, Class A - Exposed Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class A - Exposed Concrete Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class A - Exposed Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class A - Haunched Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class A - Haunched Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class B - Exposed Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class B - Exposed Concrete Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class B - Exposed Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class B - Haunched Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class B - Haunched Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class C - Exposed Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class C - Exposed Concrete Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class C - Exposed Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class C - Haunched Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class C - Haunched Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class A - Exposed Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class A - Exposed Concrete Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class A - Exposed Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class A - Haunched Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class A - Haunched Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class B - Exposed Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class B - Exposed Concrete Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class B - Exposed Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class B - Haunched Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class B - Haunched Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class C - Exposed Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class C - Exposed Concrete Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class C - Exposed Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class C - Haunched Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class C - Haunched Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class D - Exposed Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class D - Exposed Concrete Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class D - Exposed Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class D - Haunched Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class D - Haunched Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class E - Exposed Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class E - Exposed Concrete Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class E - Exposed Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class E - Haunched Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class E - Haunched Paver Pavement	Download	Download
KS300 QuickLok	KS300 12”, Stainless Steel Edge Rail, Class A - Exposed Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class A - Exposed Concrete Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class A - Exposed Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class A - Haunched Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class A - Haunched Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class B - Exposed Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class B - Exposed Concrete Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class B - Exposed Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class B - Haunched Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class B - Haunched Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class C - Exposed Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class C - Exposed Concrete Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class C - Exposed Paver Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class C - Haunched Asphalt Pavement	Download	Download
	KS300 12”, Stainless Steel Edge Rail, Class C - Haunched Paver Pavement	Download	Download

Videos

K300 Build & Install with Installation Devices

KlassikDrain is a general purpose trench drain system available in 4″ (100 mm) – K100, 8″ (200 mm) – K200 and 12″ (300 mm) – K300 internal width with either galvanized or stainless steel edge rail. All systems have 130 ft (40 m) continuous slope. The video shown here displays the assembly and installation of the K300 series with Installation Devices provided by ACO.

ACO “How To” Series: End Cap Placement

This video describes how to prepare and install an end cap for an ACO Drain product. While the video displays the method for a 4″ channel, the same method can be used for 8″ and 12″ channels.

ACO “How To” Series: Knockouts

This video describes how to properly remove the knockout portion of an ACO drain for pipe placement. The section of drain used in the video is a 4″ wide trench drain, but the same methods apply to the 8″ and 12″ wide versions as well.

Portfolios

Project Name	City	State	Product Line	Product Family	Product	Location	PDF Link
4th St./3rd Ave. Apartments	St. Pete	FL	ACO Drain	KlassikDrain	K300	Roadways	Download
Amber Cove Cruise Terminal	Maimon	Dominican Republic	ACO Drain	KlassikDrain	K300	Ports/Docks	Download
FedEx Ground Facility	New Castle	DE	ACO Drain	KlassikDrain	K300	Commercial Business	Download

ACO. we care for water