SlabDrain — HSK Series (Iron Edge)
Iron Edge – HSK Series
The SlabDrain – HSK series are available in 4” (H100SK-10), 8” (H200SK-13), and 12” (H300SK-13) internal width. The HSK series is based on the PowerDrain® grate and ductile iron rail system where grates are secured with either PowerLok® or 4-Bolt.
H100SK-10
4” Internal Width
H200SK-13
8” Internal Width
H300SK-13
12” Internal Width
Key
ADA compliant
Compliant with Americans with Disabilities Act of 2010, Section 302.3
Heel-resistant
ASME A112.6.3 - 2001 Heel-resistant slot width less than 0.31" (8 mm)
Heel-safe
Heel-safe slot width equal or less than 0.25" (6.5 mm)
Anti-slip grates
BPN over 24 (test results available)
Bicycle safe
Compliant to Australian Standard AS 3996 - 2006
Non-metallic
No metallic/magnetic parts included
Water Intake
Click these icons to calculate water intake on that specific grate style
| Part No. | Length in (m) |
Slot size in |
Intake area in2 | Calculate Water Intake | Weight lbs | |
|
|
|
|||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LOAD CLASS F (EN 1433) - 202,328 LBS - 6,962 PSI (HEAVY DUTY TRAFFIC) | ||||||||||||
| LONGITUDINAL IRON |
|
POWERLOK LOCKING | ||||||||||
   |
Longitudinal Iron | 96096 | 19.69 (0.5) | 1.36 x 0.45 | 25.2 | |
13.6 |
✓ |
✓ |
× |
✓ |
|
| SLOTTED IRON |
|
POWERLOK LOCKING | ||||||||||
 |
Slotted Iron | 96082 | 19.69 (0.5) | 0.43 x 1.98 avg. | 25.7 | |
12.3 |
✓ |
× |
× |
✓ |
|
| 4-BOLT IRON |
|
4-BOLT LOCKING | ||||||||||
 |
Slotted Iron | 99590 | 19.69 (0.5) | 0.71 x 1.81 avg. | 36.0 | |
10.8 |
✓ |
× |
× |
✓ |
|
Key
ADA compliant
Compliant with Americans with Disabilities Act of 2010, Section 302.3
Heel-resistant
ASME A112.6.3 - 2001 Heel-resistant slot width less than 0.31" (8 mm)
Heel-safe
Heel-safe slot width equal or less than 0.25" (6.5 mm)
Anti-slip grates
BPN over 24 (test results available)
Bicycle safe
Compliant to Australian Standard AS 3996 - 2006
Non-metallic
No metallic/magnetic parts included
Water Intake
Click these icons to calculate water intake on that specific grate style
| Part No. | Length in (m) |
Slot size in |
Intake area in2 | Weight lbs | |
|
|
|
|||
|---|---|---|---|---|---|---|---|---|---|---|---|
| LOAD CLASS E (EN 1433) - 134,885 LBS - 2,321 PSI (INDUSTRIAL TRAFFIC) | |||||||||||
| LONGITUDINAL IRON |
|
POWERLOK LOCKING | |||||||||
  |
Longitudinal Iron | 72263 | 19.69 (0.5) | 1.36 x 0.45 | 32.4 | 26.4 |
✓ |
✓ |
× |
✓ |
|
| Part No. | Length in (m) |
Slot size in |
Intake area in2 | Calculate Water Intake | Weight lbs | |
|
|
|
|||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LOAD CLASS F (EN 1433) - 202,328 LBS - 3,481 PSI (HEAVY DUTY TRAFFIC) | ||||||||||||
| SLOTTED IRON |
|
POWERLOK LOCKING | ||||||||||
 ![](https://acoswm.com/wp-content/uploads/2021/02/load-gray.png") |
Slotted Iron | 02449 | 19.69 (0.5) | 0.71 x 3.62 avg | 70.1 | |
30.8 |
× |
× |
× |
✓ |
|
| 4-BOLT IRON |
|
4-BOLT LOCKING | ||||||||||
 |
4-Bolt Iron | 99591 | 19.69 (0.5) | 0.71 x 3.62 avg | 71.3 | |
26.4 |
× |
× |
× |
✓ |
|
Key
ADA compliant
Compliant with Americans with Disabilities Act of 2010, Section 302.3
Heel-resistant
ASME A112.6.3 - 2001 Heel-resistant slot width less than 0.31" (8 mm)
Heel-safe
Heel-safe slot width equal or less than 0.25" (6.5 mm)
Anti-slip grates
BPN over 24 (test results available)
Bicycle safe
Compliant to Australian Standard AS 3996 - 2006
Non-metallic
No metallic/magnetic parts included
Water Intake
Click these icons to calculate water intake on that specific grate style
| Part No. | Length in (m) |
Slot size in |
Intake area in2 | Weight lbs | |
|
|
|
|||
|---|---|---|---|---|---|---|---|---|---|---|---|
| LOAD CLASS E (EN 1433) - 134,885 LBS - 2,321 PSI (INDUSTRIAL TRAFFIC) | |||||||||||
| LONGITUDINAL IRON |
|
POWERLOK LOCKING | |||||||||
 |
Longitudinal Iron | 96833 | 19.69 (0.5) | 0.76 x 0.31 | 63.2 | 64.0 |
✓ |
✓ |
✓ |
✓ |
|
| Part No. | Length in (m) |
Slot size in |
Intake area in2 | Calculate Water Intake | Weight lbs | |
|
|
|
|||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LOAD CLASS F (EN 1433) - 202,328 LBS - 3,481 PSI (HEAVY DUTY TRAFFIC) | ||||||||||||
| SLOTTED IRON |
|
POWERLOK LOCKING | ||||||||||
 |
Slotted Iron | 02445 | 19.69 (0.5) | 0.71 x 3.61 avg. | 122.6 | |
50.0 |
✓ |
× |
× |
✓ |
|
| 4-BOLT IRON |
|
4-BOLT LOCKING | ||||||||||
 |
4-Bolt Iron | 99592 | 19.69 (0.5) | 0.71 x 3.75 avg. | 115.5 | |
50.2 |
✓ |
× |
× |
✓ |
|
POWERLOK - BOLTLESS LOCKING SYSTEM
To lock, position side of grate into lugs on rail, place hook part of tool into PowerLok slot and push towards rail.
To open PowerLok, insert tool between rail and PowerLok device.
Rotate tool 90o. PowerLok device should push away from rail.
4-BOLT GRATES
Position grate onto channel, align holes in grate with matching holes in edge rail.
Use wrench or socket set to tighten. If using a torque wrench, do not set to more than 15 ft. lbs.
To remove grates, use wrench or socket set. Carefully store bolts for refitting of grates. Tamper-resistant bolts require a tamperresistant drive bit
| Part No. | Invert Depth [in] | Invert Depth [mm] | Overall Depth [in] | Overall Depth [mm] | Volume [gal] | Weight [lbs] | |
|---|---|---|---|---|---|---|---|
4" Internal Width | |||||||
H100SK-10 | |||||||
| Constant Depth Channel - 39.37" (1 m) | 93412 | 2.83 | 72 | 3.15 | 80 | 1.2 | 43.5 |
| Closing End Cap | - | - | 3.15 | 80 | - | 1.0 | |
8" Internal Width | |||||||
H200SK-13 | |||||||
| Constant Depth Channel - 39.37" (1 m) | 63456 | 3.94 | 100 | 5.12 | 130 | 3.7 | 66.4 |
| Closing End Cap | - | - | 5.12 | 130 | - | 1.0 | |
12" Internal Width | |||||||
H300SK-13 | |||||||
| Constant Depth Channel - 39.37" (1 m) | 3.94 | 100 | 5.12 | 130 | 5.5 | 82.2 | |
| Closing End Cap | - | - | 5.12 | 130 | - | 1.4 |
| Part No. | Weight | ||
|---|---|---|---|
 | Membrane No-Hub Drain - Stainless Steel | 01043 | 8.9 |
 | Grate Removal Tool | 01318 | 0.3 |
 | Debris Strainer for 4" bottom knockout | 93488 | 0.1 |
PowerLok® Safety Clip | 10443 | 0.1 | |
 | Tamper-Resistant Bolt for 4-Bolt Grate | 138127 | 0.1 |
Tamper-Resistant Bolt Driver | 138128 | 0.1 | |
 | Replacement Bolt for 4-Bolt Grate | 95523 | 0.1 |
DR100 ACO Drain Catalog Part 1 – Introduction
DR100 ACO Drain Catalog Part 4 – SlabDrain
DR100 ACO Drain Catalog Part 5 – Technical Support
DL016 Polymer Concrete Install Guide Spanish 2017
DR702 Installation Device Guide
3-Part Specifications
SlabDrain - Iron Edge Heavy Duty Shallow Depth Trench Drain 3-Part Spec Sheet
Trench Systems
SlabDrain - H100SK-10 Iron Edge Channel With Longitudinal Grate Spec Sheet
SlabDrain - H100SK-10 Iron Edge Channel With Slotted Grate Spec Sheet
SlabDrain - H100SK-10 Iron Edge Channels Spec Sheet
SlabDrain - H200SK-13 Iron Edge Channel System With Slotted Grate Spec Sheet
SlabDrain - H200SK-13 Iron Edge Channels Spec Sheet
SlabDrain - H300SK-10 Iron Edge Channels Spec Sheet
SlabDrain - H300SK-13 Iron Edge Channel System With Longitudinal Grate Spec Sheet
SlabDrain - H300SK-13 Iron Edge Channel System With Slotted Grate Spec Sheet
Grates
4" (100 mm) Grates
PowerDrain - S100K Ductile Iron Longitudinal Grate Spec Sheet
PowerDrain - S100K Ductile Iron Slotted Grate Spec Sheet
PowerDrain - S100K 4-Bolt Ductile Iron Grate Spec Sheet
8" (200 mm) Grates
PowerDrain - S200K Ductile Iron Longitudinal Grate Spec Sheet
PowerDrain - S200K Ductile Iron Slotted Grate Spec Sheet
PowerDrain - S200K 4-Bolt Ductile Iron Grate Spec Sheet
12" (300 mm) Grates
PowerDrain - S300K Ductile Iron Longitudinal Grate Spec Sheet
PowerDrain - S300K Ductile Iron Slotted Grate Spec Sheet
PowerDrain - S300K 4-Bolt Ductile Iron Grate Spec Sheet
| Description | Documents | |
| DWG | ||
| H100SK-10, Class A - Exposed Asphalt Pavement | Download | Download |
| H100SK-10, Class A - Exposed Concrete Pavement | Download | Download |
| H100SK-10, Class A - Exposed Paver Pavement | Download | Download |
| H100SK-10, Class B - Exposed Asphalt Pavement | Download | Download |
| H100SK-10, Class B - Exposed Concrete Pavement | Download | Download |
| H100SK-10, Class B - Exposed Paver Pavement | Download | Download |
| H100SK-10, Class C - Exposed Asphalt Pavement | Download | Download |
| H100SK-10, Class C - Exposed Concrete Pavement | Download | Download |
| H100SK-10, Class C - Exposed Paver Pavement | Download | Download |
| H100SK-10, Class D - Exposed Asphalt Pavement | Download | Download |
| H100SK-10, Class D - Exposed Concrete Pavement | Download | Download |
| H100SK-10, Class D - Exposed Paver Pavement | Download | Download |
| H100SK-10, Class E - Exposed Asphalt Pavement | Download | Download |
| H100SK-10, Class E - Exposed Concrete Pavement | Download | Download |
| H100SK-10, Class E - Exposed Paver Pavement | Download | Download |
| H200SK-13, Class A - Exposed Asphalt Pavement | Download | Download |
| H200SK-13, Class A - Exposed Concrete Pavement | Download | Download |
| H200SK-13, Class A - Exposed Paver Pavement | Download | Download |
| H200SK-13, Class B - Exposed Asphalt Pavement | Download | Download |
| H200SK-13, Class B - Exposed Concrete Pavement | Download | Download |
| H200SK-13, Class B - Exposed Paver Pavement | Download | Download |
| H200SK-13, Class C - Exposed Asphalt Pavement | Download | Download |
| H200SK-13, Class C - Exposed Concrete Pavement | Download | Download |
| H200SK-13, Class C - Exposed Paver Pavement | Download | Download |
| H200SK-13, Class D - Exposed Asphalt Pavement | Download | Download |
| H200SK-13, Class D - Exposed Concrete Pavement | Download | Download |
| H200SK-13, Class D - Exposed Paver Pavement | Download | Download |
| H200SK-13, Class E - Exposed Asphalt Pavement | Download | Download |
| H200SK-13, Class E - Exposed Concrete Pavement | Download | Download |
| H200SK-13, Class E - Exposed Paver Pavement | Download | Download |
| H300SK-13, Class A - Exposed Asphalt Pavement | Download | Download |
| H300SK-13, Class A - Exposed Concrete Pavement | Download | Download |
| H300SK-13, Class A - Exposed Paver Pavement | Download | Download |
| H300SK-13, Class B - Exposed Asphalt Pavement | Download | Download |
| H300SK-13, Class B - Exposed Concrete Pavement | Download | Download |
| H300SK-13, Class B - Exposed Paver Pavement | Download | Download |
| H300SK-13, Class C - Exposed Asphalt Pavement | Download | Download |
| H300SK-13, Class C - Exposed Concrete Pavement | Download | Download |
| H300SK-13, Class C - Exposed Paver Pavement | Download | Download |
| H300SK-13, Class D - Exposed Asphalt Pavement | Download | Download |
| H300SK-13, Class D - Exposed Concrete Pavement | Download | Download |
| H300SK-13, Class D - Exposed Paver Pavement | Download | Download |
| H300SK-13, Class E - Exposed Asphalt Pavement | Download | Download |
| H300SK-13, Class E - Exposed Concrete Pavement | Download | Download |
| H300SK-13, Class E - Exposed Paver Pavement | Download | Download |
ACO “How To” Series: End Cap Placement
This video describes how to prepare and install an end cap for an ACO Drain product. While the video displays the method for a 4″ channel, the same method can be used for 8″ and 12″ channels.
ACO “How To” Series: Knockouts
This video describes how to properly remove the knockout portion of an ACO drain for pipe placement. The section of drain used in the video is a 4″ wide trench drain, but the same methods apply to the 8″ and 12″ wide versions as well.